Electrocardiógrafo BeneHeart R12

• Physical
  • Height: 128 mm
  • Width: 365 mm
  • Depth: 305 mm
  • Weight: 8 Kg
• Processing
  • ECG sampling rate: 1000 samples/second/channel
  • Pacer detection sampling rate: 16,000 samples/second/channel
  • ECG amplifier: DC-coupled
  • Acquisition mode: Pre-acquisition or post-acquisition, provide 10 seconds of instantaneous ECG acquisition
  • Dynamic range: AC Differential ±10 mV, DC offset ±600 mV
  • Resolution: 1 μV/LSB
  • Frequency response: –3 dB @ 0.05 to 150 Hz
  • Baseline drift filter: 0.05 Hz, Baseline Drift Removal (BDR)
  • High cut-off frequency: 20 Hz, 35 Hz, 150 Hz
  • AC filter: 50/60 Hz
  • Common mode rejection: ≥110 dB (with AC filter switched off)
  • ADC: 24 bit
  • Input impedance: ≥50 MΩ @ 10 Hz, defibrillator protected
  • Time Constant: ≥3.2 s
  • Noise Level: ≤15 μV
  • Patient leakage: <10 μA
  • Heart rate meter: 30 to 300 BPM ±10% or ±5 BPM, whichever is greater.
  • Sensitivity/gain: 2.5, 5, 10, 20, L=10 C=5, L=20 C=10 mm/mV, Auto
  • Boot time: ≤7 s
• Display
  • Color: 24 bit Color display
  • Display type: 8 inch diagonal, TFT LCD with LED graphics backlit
  • Display resolution: 800×480
  • Display data: Patient ID, Patient name, gender, age, heart rate, clock, battery power indicator, waveforms, lead labels, speed, gain, filter settings, warning messages, information messages, network status, USB
• Power
  • Power supply: AC input (without external power adaptor) or battery operation
• AC Power
  • Input voltage: 100 to 240 VAC ±10%
  • Input power: 100 VA
  • AC frequency: 50/60 Hz ± 3 Hz
• Battery
  • Battery type: Rechargeable Lithium ion battery, 4500 mAh
  • Charge time: ≤ 6h to 90% and ≤ 7h to 100% with device off
  • Battery Capacity: More than 3.5 hours of continuous operation or 400 ECGs recording
• Writer
  • Writer technology: Thermal dot array
  • Writer speed: 5, 12.5, 25 & 50 mm/s
  • Number of traces: 12 leads
  • Writer speed accuracy: ±5%
  • Writer amplitude accuracy: ±5%
  • Writer resolution: Horizontal 40 dots/mm @ 25 mm/s, Vertical 8 dots/mm
  • Paper type: Thermal Z-fold A4 paper (210 mm x 295 mm)

US Letter 8.5×11 in (215 mm x 280 mm)

• Software
  • Measurement and interpretation: Supports measurement and interpretation with the University of Glasgow ECG analysis algorithm
  • Resting ECG mode: Records and prints 12-lead resting ECG with 10-second duration as a standard feature
  • Supported patient information: Patient ID, secondary ID, name, age, date of birth, gender, race, medication, class, V3 electrode Placement.
  • Internal storage: 800 ECGs in internal memory
  • ECG Storage format: XML, PDF, Mindray
  • Report Formats: 3×4+1R, 3×4+3R, 6×2, 6×2+1R, 12×1
• Additional Functions
  • Preview and review full ECG report on screen
  • Reanalyze ECG automatically after changing patient’s demographics
  • Touch screen (Optional)
  • Connect to external printer directly
  • Upload XML reports through FTP protocol
  • Support barcode reader
  • Wifi (Optional)
  • USB flash drive storage of PDF and XML outputs
• Accessories
  • ECG patient cable with banana plugs, Limb Clamps, Chest Bulbs (IEC/AHA)
  • ECG cable with Electrode clips (IEC/AHA)
  • ECG patient cable with banana plugs, banana to tab lead adapters, ECG tab electrodes
  • Country-specific power cords
  • Z-fold thermal paper (Letter or A4)
  • Trolley
  • Laser printer
  • Barcode reader